Motorola IMPRES 2 Single Charger (Pod Only)

Motorola IMPRES 2 Single Charger (Pod Only)

Directly replacing the now cancelled WPLN4226A, the PMPN4527 (aka PMPN4527A) is a next-generation IMPRES 2 single charger. This is a pod only and requires a power supply (sold separately).

Motorola PMPN4527A is an IMPRES version 2 single unit charger that allows charging of non-IMPRES, IMPRES version 1 and IMPRES version 2 series batteries. The advantage of IMPRES chargers such as this is that they periodically calibrate and recondition the battery, yields the following benefits:

• Maximize battery life by significantly reducing heat during the trickle and post-charge cycles.
• Determines the current battery status, giving the radio user an indication of effective use time.
• Provide higher-rate IMPRES Lithium-Ion battery charging.
• Automatically performs calibration and reconditioning when needed.
• Minimizes IMPRES battery heating, regardless of how long the battery is left in the charger pocket.
• Periodically charges a battery stored in the charger, maintaining a high state of readiness for the user.
• Eliminates Nickel battery memory effect, eliminating the need to purchase special equipment or train personnel in tasks to maintain battery life cycle.

Using Motorola's unique IMPRES (now IMPRES version 2) patented system, there is no longer any requirement to track and record IMPRES batteries, conduct manual calibration, or remove batteries from chargers after charging is complete.

Motorola IMPRES Adaptive Charger System is a fully automated charging and conditioning system. The charger pocket accommodates either a radio with an attached battery, or a battery by itself. Batteries charge best at room temperature.

Prerequisites: Note that the radio can only be turned on when the radio is transmitting data wirelessly. Otherwise, turn off the radio.

For a full IMPRES functionality, a new IMPRES battery must be initialized by the charger. The charger automatically detects the new IMPRES battery, and automatically starts initialization. Initialization is the first calibration and reconditioning of an IMPRES battery.